| 基于Trio的火焰切割机开放式数控系统研究 |
| |
| 引用本文： | 张生芳,毛俊峰,王毅,解明君,王伟国.基于Trio的火焰切割机开放式数控系统研究[J].制造技术与机床,2012(7):105-108. |
| |
| 作者姓名： | 张生芳 毛俊峰 王毅 解明君 王伟国 |
| |
| 作者单位： | 1. 大连交通大学,辽宁大连,116028
2. 大连奥拓股份有限公司,辽宁大连,100107 |
| |
| 基金项目： | 辽宁省自然科学基金，辽宁省高等学校优秀人才支持计划，大连市科学技术基金 |
| |
| 摘 要： | 研发了一种应用于白车身焊装装备制造的火焰切割机开放式数控系统。基于工业控制计算机IPC和运动控制器Trio MC 206提出了开放式火焰切割机控制系统的结构方案,并进行了详细的软硬件设计。在Visual Studio 2008软件环境中利用C#语言开发了数控系统的上位机管理软件,在TrioMotion Perfect2软件环境下开发了下位机底层控制程序。实践结果表明,该火焰切割机数控系统运行稳定可靠,能很好地满足汽车白车身焊装装备制造中的工作要求。
|
| 关 键 词： | 火焰切割机 开放式数控系统 Trio运动控制器 |
Study on open architecture NC system of flame cutting machine based on Trio motion controller |
| |
| ZHANG Shengfang
,
MAO Junfeng
,
WANG Yi
,
XIE Mingjun
,
WANG Weiguo.Study on open architecture NC system of flame cutting machine based on Trio motion controller[J].Manufacturing Technology & Machine Tool,2012(7):105-108. |
| |
| Authors: | ZHANG Shengfang MAO Junfeng WANG Yi XIE Mingjun WANG Weiguo |
| |
| Affiliation: | ②(①Dalian Jiaotong University,Dalian 116028,CHN;②Dalian Auto-Tech Incorporated Corporation,Dalian 100107,CHN) |
| |
| Abstract: | An open architecture NC system of flame cutting machine applied in auto white-body welding line manufacturing is developed in this paper.The general planning and the composition of the open style NC system is presented based on IPC and Trio MC206 motion controller,the hardware and software of the control system are designed detailedly.IPC management software developed by using C# language in Visual Studio 2008 and rock-bottom control program of Trio controller developed in Motion Perfect2 are realized.The application results show that the open style NC system of flame cutting machine is reliable and stable which can meet the requirements of auto white-body manufacturing perfectly. |
| |
| Keywords: | Flame Cutting Machine Open Architecture NC System Trio Motion Controller |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
