| 挤压速度对铝型材分流模寿命影响的模拟分析 |
| |
| 引用本文： | 庞祖高,张银意,唐志强,丁洋.挤压速度对铝型材分流模寿命影响的模拟分析[J].锻压技术,2010,35(1). |
| |
| 作者姓名： | 庞祖高 张银意 唐志强 丁洋 |
| |
| 作者单位： | 广西大学机械工程学院,广西,南宁,530004 |
| |
| 基金项目： | 有色金属及材料加工新技术教育部重点实验室开放基金(GXKFJ-13) |
| |
| 摘 要： | 挤压速度是影响铝型材分流模寿命的主要因素之一。不同挤压速度下,模具所受温度和压力不同,对模具寿命产生直接影响。以矩形管铝型材挤压为例,利用Deform有限元分析软件对挤压过程进行数值模拟,得到不同挤压速度下分流模温度和压力变化情况。结果表明:随挤压速度的增大,分流模各工作部位温度逐渐升高,而所承受压力则先降低后升高。探讨了温度和压力的改变对模具寿命的影响机制,指出挤压速度对模具寿命的影响表现为加速模具各工作部分的塑性变形、磨损和应力集中部位失效,以及加剧挤压模的冷热疲劳现象。
|
| 关 键 词： | 铝型材 挤压速度 数值模拟 早期失效 |
Simulation analysis of extrusion speed influence to porthole die life |
| |
| PANG Zu-gao,ZHANG Yin-yi,TANG Zhi-qiang,DING Yang.Simulation analysis of extrusion speed influence to porthole die life[J].Forging & Stamping Technology,2010,35(1). |
| |
| Authors: | PANG Zu-gao ZHANG Yin-yi TANG Zhi-qiang DING Yang |
| |
| Affiliation: | College of Mechanical Engineering;Guangxi University;Nanning 530004;China |
| |
| Abstract: | Speed is one of the main factors to affect the life of aluminum extrusion porthole die.At different extrusion speeds,mold temperature and pressure are different,and such situations have a direct impact on the die life.Taking aluminum extrusion rectangular tube as an example,extrusion process of porthole die was simulated by finite element software Deform,and the regularity for change of porthole die temperature and pressure was obtained.The results show that with velocity increases,the temperature of portho... |
| |
| Keywords: | aluminum extruded sections extrusion speed numerical simulaton early failure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
