首页 | 本学科首页   官方微博 | 高级检索  
     

Ghost离心叶轮内部湍流流动数值模拟
引用本文:张吉礼,马良栋,任晓东.Ghost离心叶轮内部湍流流动数值模拟[J].流体机械,2009,37(3).
作者姓名:张吉礼  马良栋  任晓东
作者单位:1. 大连理工大学,辽宁,大连,116024
2. 杭州市建筑设计研究院有限公司,浙江杭州,310001
基金项目:国家自然科学基金,大连市优秀青年科技人才基金 
摘    要:应用FLUENT软件对Ghost离心叶轮内部湍流流动进行了数值研究,其中湍流模型采用雷诺应力模型(RSM),转子和定子的耦合采用混合平面模型(MP).计算结果与Johnson的试验结果基本一致,表明了RSM能较好的预测离心叶轮内的湍流流动.分析了离心叶轮内部的湍流流动特性,表明边界层内的二次流对低能流体的输运,使叶轮出口形成"尾迹一射流"现象,同时尾迹区的存在造成能量的损失,且尾迹区位置取决于无量纲数Rossby数.

关 键 词:离心叶轮  湍流  二次流  数值模拟

Numerical Simulation of Internal Turbulent Flow in Ghost Centrifugal Impeller
ZHANG Ji-li,MA Liang-dong,REN Xiao-dong.Numerical Simulation of Internal Turbulent Flow in Ghost Centrifugal Impeller[J].Fluid Machinery,2009,37(3).
Authors:ZHANG Ji-li  MA Liang-dong  REN Xiao-dong
Affiliation:1.Dalian University of Technology;Dalian 116024;China;2.Hangzhou Architectural Design and Research Institute Co.;Ltd.;Hangzhou 310001;China
Abstract:The internal turbulent flow in Ghost centrifugal impeller is investigated numerically by CFD software FLUENT.And the Reynolds stress model(RSM) is used to simulate turbulent flow.The mixing plane model(MP) is provided to couple the rotor and stator.The simulated results are accordance with Johnson's experimental results,which show that the turbulent flow in centrifugal impeller can be predicted well by RSM.The internal turbulent flow distribution in different cross section of the impeller is analyzed.The re...
Keywords:centrifugal impeller  turbulent flow  secondary flow  numerical simulation  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号