| 脱箱造型串联浇注工艺 |
| |
| 引用本文： | 张美文. 脱箱造型串联浇注工艺[J]. 现代铸铁, 2005, 25(4): 46-47 |
| |
| 作者姓名： | 张美文 |
| |
| 作者单位： | 无锡布勒机械制造有限公司,江苏,无锡,214023 |
| |
| 摘 要： | 采用呋喃树脂自硬砂脱箱造型法制作单个型块，然后将多个具有共用一个浇注系统的型块组装在一起进行浇注，可以简化模具，节约用砂，提高生产率。
|
| 关 键 词： | 呋喃树脂自硬砂 脱箱造型 串联浇注 |
| 文章编号： | 1003-8345(2005)04-0046-02 |
| 收稿时间： | 2005-03-16 |
| 修稿时间： | 2005-03-16 |
Casting Method with Snap Flask Molding and Pouring after Multi-Molds Assembled |
| |
| ZHANG Mei-wen. Casting Method with Snap Flask Molding and Pouring after Multi-Molds Assembled[J]. Modern Cast Iron, 2005, 25(4): 46-47 |
| |
| Authors: | ZHANG Mei-wen |
| |
| Abstract: | Snap flask molding was adopted to make mold-bricks with furan self-setting sand, then several mold bricks which have a common pouring system were assembled into one multiple-cavity mold, and were poured together. It is possible, by using such casting method, to simplify pattern equipments, save furan sand and increase productivity. |
| |
| Keywords: | furan resin self-setting sand snap flask molding pouring after multi-molds assembled |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
