| 基于ADAMS的曲柄摇杆机构的运动精度仿真研究 |
| |
| 引用本文： | 武丽梅,耿华.基于ADAMS的曲柄摇杆机构的运动精度仿真研究[J].机械设计与制造,2006(10):9-11. |
| |
| 作者姓名： | 武丽梅 耿华 |
| |
| 作者单位： | 1. 沈阳航空工业学院,沈阳,110034
2. 长春理工大学,机电工程学院,长春,130022 |
| |
| 摘 要： | 通过建立了曲柄摇杆机构的虚拟样机模型并对模型进行了参数化。通过仿真可建立杆长制造误差、运动副间隙与连杆曲线轨迹精度的数量级别关系，为曲柄摇杆机构的制造、装配提供了依据。
|
| 关 键 词： | 曲柄摇杆机构 杆长制造误差 运动副间隙 |
| 文章编号： | 1001-3997（2006）10-0009-03 |
| 收稿时间： | 2006-03-20 |
| 修稿时间： | 2006-03-20 |
Motion precision simulation research of crank-rocker mechanism based on ADAMS |
| |
| WU Li-mei,GENG Hua.Motion precision simulation research of crank-rocker mechanism based on ADAMS[J].Machinery Design & Manufacture,2006(10):9-11. |
| |
| Authors: | WU Li-mei GENG Hua |
| |
| Affiliation: | Shenyang Institute of Aeronautical Engineering, Shenyang 110034, China;Changchun University of Science and Technology, Changchun 130022, China |
| |
| Abstract: | The ideal virtual prototype model of crank - rocker mechanism in the ADAMS software is established, and virtual prototypes models with bar error and with joint clearance are established, too. And these models are parameterized. It is established by simulation that the quantity relation between coupler - curve path precision and manufacturing errors of bar - lengths and joint clearance. This study provides the basis of manufacture and assembly of crank - rocker mechanism. |
| |
| Keywords: | ADAMS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
