| Abstract: | Analyses of firings by the up‐and‐down method were employed to gain a better understanding of the influences of foil bridge width, foil thickness, flyer thickness, and barrel length on the sensitivity of exploding foil initiators. Characterization was performed via the mean threshold voltage. The results showed that the mean threshold voltage of exploding foil initiators was reduced by 16 % when the foil bridge width was reduced from 0.4 mm to 0.3 mm, which means that a reduced foil bridge width could decrease the mean threshold voltage of exploding foil initiators as suggested by theoretical analysis. The mean threshold voltage of exploding foil initiators was reduced by 20 % as the flyer thickness was decreased from 50 μm to 25 μm, which could be an efficient way to improve the sensitivity of exploding foil initiators. The flyer accelerated to over 90 % maximum velocity after flying 0.15 mm in a fine barrel, which revealed that exceeding a barrel length of 0.15 mm has little effect on the performance of exploding foil initiators. |
