Influence of pH cycling and mechanical loading on the resin-dentin microtensile bond strength

The durability of adhesive interfaces is still a problem in adhesive restorations in dentistry. Laboratorial ageing methods have been proposed to predict the performance of materials, but they still require standardization. The objective of this study was to evaluate the resin-dentin microtensile bond strength of composite restorations subjected to pH cycling and different levels of mechanical loading. Resin blocks were built over a flat superficial dentin of bovine incisors (n = 40), using a three-step adhesive system. Half of the specimens were submitted to 10 cycles of pH cycling, followed by mechanical loading (0, 500,000; 1,000,000; 2,000,000 cycles – 98 N, 4 Hz). The other half was directly subjected to mechanical loading. After ageing, all groups were subjected to a microtensile bond test. Data were analyzed using two-way ANOVA and Tukey’s test (α = 0.05). The frequency of the early de-bonding was compared using the Chi-square test (α = 0.05). The statistical analysis revealed that the cross-product interaction ‘pH cycling’ vs. ‘number of mechanical loading cycles’ (p = 0.72) as well as the main factor ‘pH cycling’ (p = 0.49) was not statistically significant, and they were not able to reduce the resin–dentin bond strength values. Regarding the number of mechanical loading cycles, the groups subjected to 2,000,000 cycles showed lower bond strength values than the others (p = 0.003). The frequency of debonded specimens increased with mechanical loading. Therefore, it can be concluded that in this restorative model, at least 2,000,000 mechanical cycles are need to decrease the microtensile strength and simulate the ageing of the interface.