| 热处理对低合金高速钢组织和性能的影响 |
| |
| 引用本文： | 秦宇飞,刘剑,罗湘燕.热处理对低合金高速钢组织和性能的影响[J].金属热处理,2010,35(2). |
| |
| 作者姓名： | 秦宇飞 刘剑 罗湘燕 |
| |
| 作者单位： | 1. 空军第一航空学院,飞机战伤抢修技术研究所,河南,信阳,464000
2. 东南大学,材料科学与工程学院,江苏,南京,211189 |
| |
| 基金项目： | 江苏省科技攻关项目(编号BE2006076) |
| |
| 摘 要： | 研究了淬火及回火温度对HJ低合金高速钢组织和力学性能的影响。结果表明,HJ高速钢的奥氏体晶粒尺寸及力学性能对淬火温度很敏感。1160℃淬火时奥氏体晶粒细小均匀,综合性能良好;1170℃以上淬火时出现混晶,1210℃以上淬火时晶粒全面粗化,导致韧性显著降低。HJ高速钢回火二次硬化效果明显,二次硬化峰值温度为540℃左右。
|
| 关 键 词： | 热处理 低合金高速钢 奥氏体晶粒 硬度 冲击韧度 红硬性 二次硬化 |
Effect of heat treatment on microstructure and properties of low alloy high speed steel |
| |
| QIN Yu-fei,LIU Jian,LUO Xiang-yan.Effect of heat treatment on microstructure and properties of low alloy high speed steel[J].Heat Treatment of Metals,2010,35(2). |
| |
| Authors: | QIN Yu-fei LIU Jian LUO Xiang-yan |
| |
| Affiliation: | 1.ABDR Technology Research Institute;the First Aeronautic Institute of Air Force;Xinyang Henan 464000;China;2.School of Materials Science and Engineering;Southeast University;Nanjing Jiangsu 211189;China |
| |
| Abstract: | The effect of quenching and tempering temperature on the microstructure and mechanical properties of HJ low alloy high speed steel was studied.The results show that the austenite grain size and the mechanical properties of the steel are sensitive to quenching temperature.The austenite grains are fine and uniform when the steel is quenched at 1160 ℃,leading to good comprehensive properties of the steel.Mixed grains appear when the quenching temperature exceeds 1170 ℃ and the grains become full coarse at 1210 ℃,which result in the drastic decrease of toughness of the steel.The secondary hardening effect of HJ high speed steel is obvious,and the peak of secondary hardness of the steel is at about 540 ℃. |
| |
| Keywords: | heat treatment low alloy high speed steel austenite grain hardness impact toughness red hardness secondary hardening |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
