| TA2马氏体滚压强化研究 |
| |
| 引用本文： | 余淑荣,张建斌,樊丁.TA2马氏体滚压强化研究[J].中国表面工程,2003,16(6):21-23,26. |
| |
| 作者姓名： | 余淑荣 张建斌 樊丁 |
| |
| 作者单位： | 兰州理工大学,甘肃省有色金属新材料重点实验室,甘肃,兰州,730050 |
| |
| 基金项目： | 兰州理工大学科研发展基金资助(2002年) |
| |
| 摘 要： | 研究了TA2马氏体经滚压强化后，组织结构、残余应力、表面粗糙度的变化以及三者对材料疲劳性能的影响。滚压可使其疲劳极限提高12％；滚压组织结构中位错数量增加，并有变形孪晶生成；滚压引起的残余压应力数值较小，疲劳后没有产生明显的松弛；表面粗糙度降低。
|
| 关 键 词： | 马氏体 残余应力 疲劳极限 显微组织 |
| 文章编号： | 1007-9289(2003)06-0021-03 |
Investigation on the Cold Rolled TA2 Martensite |
| |
| YU Shu-rong,ZHANG Jian-bin,FAN Ding.Investigation on the Cold Rolled TA2 Martensite[J].China Surface Engineering,2003,16(6):21-23,26. |
| |
| Authors: | YU Shu-rong ZHANG Jian-bin FAN Ding |
| |
| Abstract: | TA2 martensite was processed by cold rolling. The microstructure, residual stress and surface roughness were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and profilometer. The experimental results showed that the fatigue limits was enhanced by cold rolled. High density dislocations and twins occurred in the strengthened surface layer, the compressive residual stress was not relaxed in fatigue process, and the surface roughness decreased. |
| |
| Keywords: | Martensite Residual stress Fatigue limit Microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《中国表面工程》浏览原始摘要信息 |
|
点击此处可从《中国表面工程》下载全文 |
