| 关于建立测量形状误差数学模型的研究 |
| |
| 引用本文： | 魏源迁,苑国英.关于建立测量形状误差数学模型的研究[J].西安工业学院学报,1988(3). |
| |
| 作者姓名： | 魏源迁 苑国英 |
| |
| 作者单位： | 西安交通大学，西安交通大学 |
| |
| 摘 要： | 本文通过分析和研究计量测试中误差分离技术的有关文献,提出用圆和圆柱形成法建立在线或在位检测工件形状误差(直线度、平面度、圆度、圆柱度、线轮廓度和面轮廓度)的数学模型。
|
| 关 键 词： | 误差分离 形状误差 数学模型 |
RESEARCH ON BUILDING UP THE MATHEMATICAL MODELS OF MEASUREMENT FORM ERRORS |
| |
| Wei Yuanqian Yuan Guoying.RESEARCH ON BUILDING UP THE MATHEMATICAL MODELS OF MEASUREMENT FORM ERRORS[J].Journal of Xi'an Institute of Technology,1988(3). |
| |
| Authors: | Wei Yuanqian Yuan Guoying |
| |
| Affiliation: | Wei Yuanqian Yuan Guoying |
| |
| Abstract: | Through analyzing and researching some related references of error separation techniques in the metrological measurement by using the methods of forming circle and cylinder, this paper proposes the whole mathematical models on the basis of on-line or in-situ test workpiece formerrors including straightness, flatness, roundness, cylindricity, profile of a line as well as profile of a surface |
| |
| Keywords: | Error separation from errors Mathematical models |
| 本文献已被 CNKI 等数据库收录！ |
