| 基于MATLAB的螺旋锥齿轮齿面数据采集方法 |
| |
| 引用本文： | 王贵,杨林,金映丽. 基于MATLAB的螺旋锥齿轮齿面数据采集方法[J]. 机械工程与自动化, 2011, 0(2) |
| |
| 作者姓名： | 王贵 杨林 金映丽 |
| |
| 作者单位： | 1. 沈阳工业大学研究生学院,辽宁,沈阳,110870
2. 沈阳工业大学机械工程学院,辽宁,沈阳,110870 |
| |
| 基金项目： | 辽宁省创新团队资助项目(2007T135) |
| |
| 摘 要： | 鉴于螺旋锥齿轮是复杂的空间曲面,故采用对齿面离散化的方法采集数据。在由加工参数确定的理论齿面模型上划分一定规格的网格,并编写MATLAB程序计算得出各个网格节点的空间坐标,将其作为理论齿面数据。实验结果表明该方法采集的数据精确、有效。
|
| 关 键 词： | 螺旋锥齿轮 数据采集 空间坐标 理论齿面 |
Method of Spiral Bevel Gear Tooth Face Data Collection Based on MATLAB |
| |
| WANG Gui,YANG Lin,JIN Ying-li. Method of Spiral Bevel Gear Tooth Face Data Collection Based on MATLAB[J]. Mechanical Engineering & Automation, 2011, 0(2) |
| |
| Authors: | WANG Gui YANG Lin JIN Ying-li |
| |
| Affiliation: | WANG Gui1,YANG Lin2,JIN Ying-li2(1.School of Postgraduate,Shenyang University of Technology,Shenyang 110870,China,2.School of Mechanical Engineering,China) |
| |
| Abstract: | Because a spiral bevel gear has complex curved surface,we use the curved surface discretization method to collect the tooth surface data.The theoretical model of tooth surface which is identified by the processing parameters is divided into grids.Then write MATLAB program to calculate the space coordinates of each mesh node,which are taken as the theoretical tooth surface data.Experimental results show that the data collected by this method are accurate and effective. |
| |
| Keywords: | spiral bevel gear data collection space coordinates theoretical tooth surface |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
