| 石材加工中的磨轮磨削工艺 |
| |
| 引用本文： | 刘增文,黄波,王志,张进生.石材加工中的磨轮磨削工艺[J].金刚石与磨料磨具工程,2005(4):41-43. |
| |
| 作者姓名： | 刘增文 黄波 王志 张进生 |
| |
| 作者单位： | 山东大学机械工程学院,石材工程中心,山东,济南,250061;山东大学机械工程学院,石材工程中心,山东,济南,250061;山东大学机械工程学院,石材工程中心,山东,济南,250061;山东大学机械工程学院,石材工程中心,山东,济南,250061 |
| |
| 摘 要： | 本文是通过实验的方法研究花岗石磨抛工艺，分析磨轮磨损的原因和影响光泽度的因素，探讨磨轮在花岗石磨削过程中的半径补偿，以指导实际生产，提高生产效率和加工精度。通过实验可以得到以下结论：磨轮的磨损主要取决于石材的硬度和石材去除量，石材硬度愈高，磨轮寿命愈短；去除量愈大，磨轮磨损愈大。树脂型磨轮磨抛花岗石，磨轮半径每米要补偿0．01-0．02mm。光泽度与磨粒的粒度和主轴转速有关，磨粒的粒度越小，转速愈高，光泽度愈高。
|
| 关 键 词： | 花岗石 磨削 磨损 光泽度 磨轮 |
| 文章编号： | 1006-852X(2005)04-0041-03 |
| 修稿时间： | 2005年4月7日 |
Technology parameters of grinding wheel in stone processing |
| |
| Liu Zengwen,Huang Bo,Wang Zhi,Zhang Jinsheng.Technology parameters of grinding wheel in stone processing[J].Diamond & Abrasives Engineering,2005(4):41-43. |
| |
| Authors: | Liu Zengwen Huang Bo Wang Zhi Zhang Jinsheng |
| |
| Abstract: | An experimental investigation was conducted in this article to study the technology of granite grinding,to analyze the cause of wheel wear and the factors influencing the glossiness, and to explore the radius compensation of grinding wheel in the process of grinding granite.The investigation result is to be used to guide practical production and to improve the production efficiency and precision.It can be concluded by means of experiments as follows:The wear of grinding wheel was mainly caused by the hardness and removal quantity of stone.The harder the stone, the shorter the life of griding wheel.The greater the removal quantity of stone,the worse the wear of grinding wheel.The radius compensation of grinding wheel is 0.01-0.02mm when grinding granites.The surface smoothness of stone is related to the grit size of abrasives and the spindle speed.The finer the grit size and the higher the speed,the better the smoothness. |
| |
| Keywords: | granite grind wear glossiness grinding wheel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
