| 模板压实造型的试验研究 |
| |
| 引用本文： | 彭树俭,徐录,李波,李玉海,王连琪,马可白.模板压实造型的试验研究[J].沈阳理工大学学报,1993(2). |
| |
| 作者姓名： | 彭树俭 徐录 李波 李玉海 王连琪 马可白 |
| |
| 作者单位： | 沈阳工业学院，沈阳第三机床厂，沈阳黎明发动机厂 |
| |
| 摘 要： | 模板压实造型法是先从上面对型砂进行预紧实,然后再从下面进行模板压实,克服了传统方法所遇到的问题,能生产出均匀的高紧实度砂型。
|
| 关 键 词： | 造型 模板 压实法 |
Testing Study on the Pattern Plate Squeeze Moulding |
| |
| Peng Shujian,Shenyang Iustitate of Technoloay
Xu Lu,Shenyany Factory of Third Machine Tool
Li Bo,Shenyang Liming Engine Factory.Testing Study on the Pattern Plate Squeeze Moulding[J].Transactions of Shenyang Ligong University,1993(2). |
| |
| Authors: | Peng Shujian Shenyang Iustitate of Technoloay
Xu Lu Shenyany Factory of Third Machine Tool
Li Bo Shenyang Liming Engine Factory |
| |
| Abstract: | The pattem plate squeeze moulding method discussed in this paper is that the moulding material is pre-squeezed from the upper face it is squeezed again from the lower face through the pattern plate, which overcomes the traitimal problems and achieves a high and uniform density in the moulding material. |
| |
| Keywords: | mouldings pattern plate squeeze |
| 本文献已被 CNKI 等数据库收录！ |
|
