| 复合材料壳体注射模设计 |
| |
| 引用本文： | 王宏斌. 复合材料壳体注射模设计[J]. 模具制造, 2007, 7(6): 36-39 |
| |
| 作者姓名： | 王宏斌 |
| |
| 作者单位： | 郑州航天电子技术有限公司,河南驻马店,463000 |
| |
| 摘 要： | 通过对复合材料电连接器座壳体的工艺分析,提出了活动型块成型、内侧滑块脱模的模具结构,此模具构思巧妙,结构简单,可靠性高,不但降低了模具成本,缩短了研制周期,而且模具寿命得到了大幅度提高.
|
| 关 键 词： | 注射模 内侧滑块 活动型块 分型面 脱模机构 |
Design of Injection Mold for the Compound Material Shell |
| |
| Wang Hongbin. Design of Injection Mold for the Compound Material Shell[J]. Die & Mould Manufacture, 2007, 7(6): 36-39 |
| |
| Authors: | Wang Hongbin |
| |
| Abstract: | Through analyzing on characteristics of the compound material shell, proposed the activity block molding and inside slide block demoulding mechanism, the mold structure was simple and clever, not only reduced the mold cost and the development cycle, more over the mold life was improved. |
| |
| Keywords: | injection mold inside slide block activity block the parting surface the demoulding mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
