首页 | 本学科首页   官方微博 | 高级检索  
     

吸附制冷用复合吸附剂的吸附性能
引用本文:崔群,陈海军,朱跃钊,姚虎卿. 吸附制冷用复合吸附剂的吸附性能[J]. 化工学报, 2005, 56(10): 1860-1864
作者姓名:崔群  陈海军  朱跃钊  姚虎卿
作者单位:南京工业大学化学化工学院,江苏 南京 210009;南京工业大学机械与动力工程学院,江苏 南京 210009
基金项目:江苏省应用基础项目(BJ97067).
摘    要:固体吸附式制冷因具有环保和节能两大优势,成为国内外竞相开发的热点,尤其是将其用于新型空调系统和太阳能应用产品方面的开发研究备受关注.但从实用化研究成果来看,还远不满足工业化条件,其主要原因之一是受吸附制冷工质对(吸附剂-制冷剂)的性能制约.目前,国内外关于吸附制冷工质对的研究报道比较多,所采用的吸附(工)质仍然以水、甲醇、乙醇和氨为主,对于吸附剂的研究进展比较快,已从当初单一组分吸附剂的选用发展到目前多组分、复合吸附剂的研制.研制性能优良的吸附剂被认为是推动固体吸附式制冷工业化的关键之一.

关 键 词:吸附制冷  复合吸附剂  吸附等温线  特征吸附功  吸附速率  
文章编号:0438-1157(2005)10-1860-05
收稿时间:2003-12-24
修稿时间:2003-12-242005-06-29

Adsorption performance of composite adsorbent for adsorption refrigeration
CUI Qun,CHEN Haijun,ZHU Yuezhao,YAO Huqing. Adsorption performance of composite adsorbent for adsorption refrigeration[J]. Journal of Chemical Industry and Engineering(China), 2005, 56(10): 1860-1864
Authors:CUI Qun  CHEN Haijun  ZHU Yuezhao  YAO Huqing
Affiliation:1. School of Chemistry and Chemical Engineering, Nanjing University of Technology , Nanjing 210009, Jiangsu, China; 2.School of Mechanical and Power Engineering, Nanjing University of Technology , Nanjing 210009, Jiangsu, China
Abstract:Adsorption performance of adsorbents for the adsorption cooling cycle was discussed. Adsorption isotherms and adsorption rate of water or ethanol on composite adsorbents prepared by the authors (named M4-0132, M1-0001, M1-9906 and M2-0003 respectively), were tested. The results of fitting to the micro-pore filling theory equation and calculation of characteristic adsorption work based on these pairs were presented. The results showed that the amount of water adsorbed by composite adsorbents was as high as 2 times that by silica gel and 2.5 times that by 13X molecular sieve, respectively, and characteristic adsorption work calculated was 2.55~4.78 kJ•mol-1, only 12%~29% of that on 13X molecular sieve. The values of adsorption rate of water on composite adsorbents were higher than that on silica gel. Analysis for ethanol adsorption on composite adsorbent, M1-0001, showed occurrence of capillary condensation, which resulted in a considerably higher ethanol uptake than on activated carbon at higher relative vapor pressure. The characteristic adsorption work of ethanol on composite sorbents was 2.55~4.78 kJ•mol-1, merely 10%~20% of that on activated carbon. Based on comprehensive estimate of adsorption properties, including adsorption loading, characteristic adsorption work and adsorption rate etc., M4-0132 and M1-0001 composite adsorbents were more preferred for the adsorption cooling process, and the preferable type of isotherm for adsorption cooling cycle appeared to be the Ⅴ type of Brunauer classification.
Keywords:adsorption refrigeration   composite adsorbent   adsorption isotherm   characteristic adsorption work   adsorption rate
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号