| 数控机床中刀具半径补偿的编程技巧 |
| |
| 引用本文： | 马有良.数控机床中刀具半径补偿的编程技巧[J].机床与液压,2006(2):232-234,202. |
| |
| 作者姓名： | 马有良 |
| |
| 作者单位： | 西南科技大学制造科学与工程学院,四川绵阳621010 |
| |
| 摘 要： | 阐述了刀具半径补偿的概念，介绍了结合刀补原理正确编制数控加工程序的方法，并通过实例说明在数控机床编程应用中如何灵活、合理地运用刀具补偿功能的技巧。
|
| 关 键 词： | 数控机床 编程 刀具半径补偿 技巧 |
| 文章编号： | 1001-3881（2006）2-232-3 |
| 收稿时间： | 2004-10-09 |
| 修稿时间： | 2004-10-09 |
The Programming Skill of Tool Radius Compensation in NC Machine |
| |
| MA Youliang.The Programming Skill of Tool Radius Compensation in NC Machine[J].Machine Tool & Hydraulics,2006(2):232-234,202. |
| |
| Authors: | MA Youliang |
| |
| Affiliation: | Southwest University of Science and Technology, Mianyang Sichuan 621010, China |
| |
| Abstract: | The concept of tool radius compensation and the programming method of NC machine considering tool radius compensation principle were discussed. How to apply the skills of tool radius compensation in the programming of numerical control machine was expatiated with an example. |
| |
| Keywords: | Numerical control machine tool Programming Tool radius compensation Skill |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
