细晶粒硬质合金刀具铣削钛合金损坏机理的研究 |
| |
引用本文: | 杨发展,艾兴,赵军,周建强. 细晶粒硬质合金刀具铣削钛合金损坏机理的研究[J]. 工具技术, 2008, 42(4): 12-15 |
| |
作者姓名: | 杨发展 艾兴 赵军 周建强 |
| |
作者单位: | 山东大学机械工程学院,250061,济南市;山东大学;青岛农业大学 |
| |
基金项目: | 国家自然科学基金 , 教育部全国优秀博士学位论文作者专项基金 |
| |
摘 要: | 基于用Y330细晶粒硬质合金刀具高速铣削Ti6Al4V钛合金的试验,分析了刀具的损坏形态和失效机理。结果表明,在给定的切削条件下,刀具的损坏形态以崩刃和灼烧为主,同时伴有表面材料扩散。据此提出了延长刀具寿命、提高加工效率的途径。
|
关 键 词: | 硬质合金刀具 高速铣削 钛合金 失效机理 |
修稿时间: | 2007-10-01 |
Research on Failure Mechanism of Fine Crain Cemented Carbide Tool in Milling of Titanium Alloy |
| |
Abstract: | Based on the high-speed milling experiment for titanium alloy Ti6Al4V with fine grain cemented carbide tool Y330,the tool wear and breakage modes and failure mechanisms were analyzed.The results show that the main tool failure modes are chipping and burning under the presented cutting conditions,and accompany with surface material diffusion.According to the results,some ways to prolong tool life and improve machining efficiency were put forward. |
| |
Keywords: | cemented carbide tool high-speed milling titanium alloy failure mechanism |
本文献已被 维普 万方数据 等数据库收录! |
|