| 异步轧制对硅钢极薄带三次再结晶的影响 |
| |
| 引用本文： | 高秀华,齐克敏,叶何舟,邱春林.异步轧制对硅钢极薄带三次再结晶的影响[J].材料科学与工艺,2005,13(4):384-386. |
| |
| 作者姓名： | 高秀华 齐克敏 叶何舟 邱春林 |
| |
| 作者单位： | 东北大学,轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004 |
| |
| 摘 要： | 分别采用同步和异步轧制将成品工业取向硅钢板冷轧到0.045～0.10mm,然后在纯氢气热处理炉中进行三次再结晶高温退火,研究轧制工艺参数对取向硅钢极薄带织构和磁性能的影响,探索异步轧制对硅钢极薄带三次再结晶行为影响机理.结果表明,采用异步轧制取向硅钢极薄带的磁性能优于同步轧制的;硅钢极薄带厚度愈薄,磁性能愈好,三次再结晶发展得越完善.
|
| 关 键 词： | 异步轧制 硅钢极薄带 三次再结晶 织构 磁性能 |
| 文章编号： | 1005-0299(2005)04-0384-03 |
| 收稿时间： | 2004-01-02 |
| 修稿时间： | 2004年1月2日 |
Effect of the cross shear rolling technological parameters on tertiary recrystallization of ultra- thin silicon steel strips |
| |
| GAO Xiu-hua,QI Ke-min,YE He-zhou,QIU Chun-lin.Effect of the cross shear rolling technological parameters on tertiary recrystallization of ultra- thin silicon steel strips[J].Materials Science and Technology,2005,13(4):384-386. |
| |
| Authors: | GAO Xiu-hua QI Ke-min YE He-zhou QIU Chun-lin |
| |
| Abstract: | The finished industrial grain - oriented silicon steel strips were rolled from 0. 045 to 0. 1 mm by conventional rolling and cross shear rolling respectively before annealed in pure hydrogen furnace to occur tertiary recrystallizatoin. Effect of rolling technological parameters on magnetic properties and the tertiary recrystallization behavior was investigated. The result shows that magnetic properties of the strip rolled by cross shear rolling are better than the one rolled by conventional rolling. Also, the thinner the strip, the better the magnetic properties, the more fully the tertiary recrystallization develop. |
| |
| Keywords: | cross shear rolling ultra - thin silicon steel strip tertiary recrystallization texture magnetic property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
