轴承滚柱冷镦凹模失效分析及预防对策 |
| |
引用本文: | 徐少红.轴承滚柱冷镦凹模失效分析及预防对策[J].装备制造技术,2007(4):58-58,66. |
| |
作者姓名: | 徐少红 |
| |
作者单位: | 广东工贸职业技术学院,广东,广州,510510 |
| |
摘 要: | 针对用Crl2MoV制造的轴承滚柱冷镦凹模寿命短的问题,分析了其失效的形式及原因。提出了提高凹模寿命的措施:锻造。采用预先热处理退火、调质、去应力退火工艺,改进淬火、回火工艺,增加表面处理工艺等。
|
关 键 词: | 轴承滚柱 冷镦模 Cr12MoV钢 失效分析 预防对策 |
文章编号: | 1672-545X(2007)04-0058-01 |
修稿时间: | 2007-02-01 |
The Failure Analysis of Cold Punching Mould of Roller Bearing and Countermeasures in Prevention |
| |
Authors: | XU Shao-hong |
| |
Abstract: | The cold punching mould of roller bearing which manufactured by Cr12MoV steel has a shorter life, the form of failure and failure reason are analyzed. Some measures that can prolong its life are proposed, such as forging, pre-annealing heat treatment, Quenched and tempered, stress relieving techniques, improving quenching, tempering process, increasing surface treatment processes and so. |
| |
Keywords: | Roller bearing Cold punching mould Crl2MoV steel Failure analysis Preventive Measures |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|