| 基于UG的注塑模具分型过程探讨 |
| |
| 引用本文： | 刘宝钊,李斐,王艳萍,李振宇,于文杰.基于UG的注塑模具分型过程探讨[J].塑料科技,2012,40(8):80-83. |
| |
| 作者姓名： | 刘宝钊 李斐 王艳萍 李振宇 于文杰 |
| |
| 作者单位： | 1. 大连塑料研究所有限公司,辽宁大连,116033
2. 辽宁经济职业技术学院,辽宁沈阳,110122 |
| |
| 摘 要： | 基于UG软件针对鼠标外壳上盖选用不同的分型方法,可以满足不同注塑产品的分型设计需求,对提高塑料制品生产效率和质量、降低成本具有较高的实用性。
|
| 关 键 词： | 模具设计 注塑模 分型线 分型面 注塑模向导 |
Discussion on Injection Mold Parting Process Based on UG |
| |
| Liu Baozhao
,
Li Fei
,
Wang Yanping
,
Li Zhenyu
,
Yu Wenjie.Discussion on Injection Mold Parting Process Based on UG[J].Plastics Science and Technology,2012,40(8):80-83. |
| |
| Authors: | Liu Baozhao Li Fei Wang Yanping Li Zhenyu Yu Wenjie |
| |
| Affiliation: | 1 Dalian Plastic Research Institute Co.,Ltd.,Dalian 116033,China 2 Liaoning Economic Vocational Technology Institute,Shenyang 110122,China |
| |
| Abstract: | Different parting methods were selected for mouse housing shelter based on UG.The parting design requirements for different injection products were met,and the different parting methods had high practicality on improving the production efficiency and quality of plastic products and reducing costs. |
| |
| Keywords: | Mould design Injection mold Parting line Parting surface Injection mold guide |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
