| WC-Co硬质合金注射成形过程中碳含量的控制 |
| |
| 引用本文： | 李仁琼. WC-Co硬质合金注射成形过程中碳含量的控制[J]. 稀有金属与硬质合金, 2006, 34(1): 22-25 |
| |
| 作者姓名： | 李仁琼 |
| |
| 作者单位： | 株洲硬质合金集团有限公司,湖南,株洲,412000 |
| |
| 摘 要： | 研究了WC-Co硬质合金注射成形混炼，脱脂和烧结过程中影响碳含量的因素及其规律，提出了通过采取控制混炼与脱脂的温度和时间、脱脂气氛与工艺、烧结的保温温度和保温时间等措施，实现有效控碳。
|
| 关 键 词： | WC-Co硬质合金 注射成形 热脱脂 烧结 控碳 |
| 文章编号： | 1004-0536(2006)01-0022-04 |
| 收稿时间： | 2005-08-24 |
| 修稿时间： | 2005-12-01 |
Carbon Control during MIM of WC-Co Cemented Carbide |
| |
| LI Ren-qiong. Carbon Control during MIM of WC-Co Cemented Carbide[J]. Rare Metals and Cemented Carbides, 2006, 34(1): 22-25 |
| |
| Authors: | LI Ren-qiong |
| |
| Affiliation: | Zhuzhou Cemented Carbide Group, Zhuzhou 412000, China |
| |
| Abstract: | Study is made of the effects on the carbon content and its rule during the mixing, degreasing and sintering of WC-Co cemented Carbide. The effective approach of control of carbon is presented in this paper. |
| |
| Keywords: | WC-Co cemented carbide injection molding hot degreasing sintering carbon control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
