首页 | 本学科首页   官方微博 | 高级检索  
     

具有弧齿锥齿轮啮合的试验器转子系统临界转速及稳态不平衡响应试验研究
引用本文:戚先萍.具有弧齿锥齿轮啮合的试验器转子系统临界转速及稳态不平衡响应试验研究[J].振动.测试与诊断,1998,18(2):134-138.
作者姓名:戚先萍
作者单位:西北工业大学702教研室!西安710072
摘    要:对具有弧齿锥齿轮啮合的试验器转子──支承系统的振动特性进行试验研究,采用传递矩阵法计算该试验器转子的临界转速及稳态不平衡响应,研究支承刚性及弧齿锥齿轮螺旋线的方向对稳态不平衡响应的影响。理论计算结果与试验结果吻合较好。

关 键 词:临界转速  不平衡响应  弧齿锥齿轮  实验研究

Research on Critical Speeds and Steady Unbalance Response of Rotor-Support Test Stand System Engaged with Spiral Tooth Bevel Gears
with Spiral, Tooth Bevel, Gears Qi Xianping, Xu Lingzhi, Yang Bingyu, Zhao Mng, Hu Bigang.Research on Critical Speeds and Steady Unbalance Response of Rotor-Support Test Stand System Engaged with Spiral Tooth Bevel Gears[J].Journal of Vibration,Measurement & Diagnosis,1998,18(2):134-138.
Authors:with Spiral  Tooth Bevel  Gears Qi Xianping  Xu Lingzhi  Yang Bingyu  Zhao Mng  Hu Bigang
Abstract:An experimental research on the vibration behavior of a rotor-support test stand system engaged with spiral tooth bevel gears is carried out in the paper. By using the transfer matrix method,a calculation of the critical speeds and the steady unbalance response of the rotor,and the study of the influence of the stiffness of the support and the direction of the spiral of the gears on the response are made. Theoretical results coincide with the test fairly well.
Keywords:critical speed unbalanced response spiral tooth bevel gear experimental research
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号