| Abstract: | The daily work load of 116 Dutch (male) refuse collectors working with polythene bags, two-wheeled mini-containers and large four-wheeled containers was studied. To this end a time analysis of the tasks and activities in the real working situation was made and the postures and the physiological work load of the collector working with the three different methods was assessed. Manual materials handling and the corresponding working postures were studied by means of observations. Heart rate (HR) was continuously recorded during the working day. Furthermore, to enable the assessment of the work load during refuse collecting as a percentage of the maximal oxygen uptake ([Vdot]O2max) every refuse collectors' relationship between HR and oxygen uptake was measured during a simulation of the tasks and activities in the laboratory. The range in total working time of the refuse collectors was large. Most time is spent on the task ‘loading’; this lasted on average about 5?h. The mean number of handled objects for the three refuse collecting methods is 1500 bags, 500 mini-containers and 120 large containers respectively. The mean amount of collected refuse per collector of bags and mini-containers is about 11000kg. For the collectors of the large containers it is 27% higher, namely about 14000kg. The mean weight of one object for the bags, mini-container and large container is 7, 22 and 110?kg respectively. The straight posture was the most common in refuse collecting by bags. The posture flexed at the trunk and bent forwards or backwards occurred often while pushing and pulling containers. However, the refuse collectors of the large containers pushed and pulled for shorter periods during a working day in comparison with collectors of the mini-containers. Criteria for energetic overload were set at a mean energy expendiiure of 30% [Vdot]O2 max and an energy expenditure of 50% [Vdot]O2 max or more for a maximum of 60?min per day. According to these limits the energetic work load of the collectors of bags was indicated as being too high. In order to formulate guidelines in terms of mechanical and energetic load it is necessary to measure more accurately these loads during refuse collecting activities. |
