| ANSYS软件的电压加载原理及其应用 |
| |
| 引用本文： | 李华梅 罗应立. ANSYS软件的电压加载原理及其应用[J]. 中小型电机, 2007, 31(6): 5-8 |
| |
| 作者姓名： | 李华梅 罗应立 |
| |
| 作者单位： | [1]中国工程物理研究院电子工程研究所,四川绵阳621900 [2]华北电力大学电气工程学院,北京102206 |
| |
| 摘 要： | 运用ANSYS软件进行异步电机磁场分析时存在电压加载问题。研究了利用ANSYS方便地解决电机磁场计算中电压加载以及场路耦合问题的方法,并进一步将ANSYS的电压加载方法和原理具体应用到1台11kW笼型异步电机起动计算过程中。通过后处理程序,得到电磁力矩、电流、电阻值,与实测结果对比,证实了该电压加载方法的可行性和可靠性。
|
| 关 键 词： | 电压加载 有限元分析软件 起动转矩 起动电流 |
| 文章编号： | 1673-6540（2007）06-0005-04 |
| 修稿时间： | 2007-03-06 |
Mechanism and Application of Voltage-Drop Loading Based on ANSYS |
| |
| LI Hua-mei , LUO Ying-li. Mechanism and Application of Voltage-Drop Loading Based on ANSYS[J]. S&M Electric Machines, 2007, 31(6): 5-8 |
| |
| Authors: | LI Hua-mei LUO Ying-li |
| |
| Affiliation: | 1. Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang 621900, China; 2. School of Electrical Engineering, North China Electric Power University, Beijing 102206, China |
| |
| Abstract: | Vohage-drop loading problem existed in magnetic field analysis of induction motors based on ANSYS. The voltage loading problem and magnetic field couple were well settled in this paper. The method was used in the starting procedure calculation of one 11 kW squirrel cage inductor motor. The electro-magnetic torque, current, voltage and resistance were obtained through the postprocessor. The above work was valid and reliable by comparing with the real data, |
| |
| Keywords: | voltage-drop loading software of finite element analysis starting torque starting current |
| 本文献已被 维普 等数据库收录！ |
|
