| 自适应切削技术在汽轮机制造过程中的应用 |
| |
| 引用本文： | 赵迎才,张红莲,张津.自适应切削技术在汽轮机制造过程中的应用[J].电力科学与技术学报,2000,15(1):64-66. |
| |
| 作者姓名： | 赵迎才 张红莲 张津 |
| |
| 作者单位： | 华北电力大学,河北,保定,071003 |
| |
| 摘 要： | 自适应切削可以保证在加工条件不断变化的情况下使切削过程始终处于最佳状态. 文章对自适应切削原理进行了综述,并以汽轮机中各主要零件的切削加工为例,对电力设备修造过程中采用自适应切削的可能性及优越性进行了探讨.
|
| 关 键 词： | 自适应切削 汽轮机 制造 |
| 文章编号： | 1006-740（2000）01-0064-03 |
| 修稿时间： | 1999-09-14 |
The Application for Adaptive Cut Technique in the Steam Turbine Manufacturing Process |
| |
| ZHAO Ying-cai,ZHANG Hong-lian,ZHANG Jin.The Application for Adaptive Cut Technique in the Steam Turbine Manufacturing Process[J].JOurnal of Electric Power Science And Technology,2000,15(1):64-66. |
| |
| Authors: | ZHAO Ying-cai ZHANG Hong-lian ZHANG Jin |
| |
| Abstract: | The adaptive cut can make cut process at optimum condition all along, in case the machining conditions are constantly changing. The adaptive cut principle is summarized and the possibility and superiority that adaptive cut is
used in repairing and making process for electric power equipment are discussed, by taking machining to main parts in the steam turbine, as an example. |
| |
| Keywords: | adaptive cut steam turbine manufacturing |
| 本文献已被 万方数据 等数据库收录！ |
|
