首页 | 本学科首页   官方微博 | 高级检索  
     

疲劳对铝基SiC纤维增强复合材料界面性能影响
引用本文:柳永宁,康伟,何家文,朱祖铭.疲劳对铝基SiC纤维增强复合材料界面性能影响[J].复合材料学报,2001,18(4):42-45.
作者姓名:柳永宁  康伟  何家文  朱祖铭
作者单位:1.西安交通大学 金属材料强度国家重点实验室, 西安 710049;
基金项目:自然科学重点基金 :铝基层状复合材料界面性能评定及其与疲劳的关系 ( No:5 97310 2 0 )子项目内容之一
摘    要:采用单纤维碎断法(Fragmentation)及声发射技术研究了富SiO2处理的SiC纤维增强铝基复合材料经一定疲劳载荷后的界面接合强度。发现疲劳与未疲劳状态对实验机刚度的测量影响极大, 这将直接影响纤维断裂强度的计算。采用直接溶出法测量经热压处理的纤维断裂强度,发现复合工艺对纤维的强度没有损耗,这与Clough关系的预测有巨大的差异。经一定周次疲劳后,纤维的临界长度增加,界面接合强度有所降低。 

关 键 词:复合材料    断裂    声发射
文章编号:1000-3851(2001)04-0042-04
收稿时间:2000-01-08
修稿时间:2000年1月8日

EFFECT OF FATIGUE ON INTERFACIAL SHEAR STRENGTH OF SiC FIBER REINFORCED MMC
LIU Yong-ning,KANG Wei,HE Jia-wen,ZHU Zu-ming.EFFECT OF FATIGUE ON INTERFACIAL SHEAR STRENGTH OF SiC FIBER REINFORCED MMC[J].Acta Materiae Compositae Sinica,2001,18(4):42-45.
Authors:LIU Yong-ning  KANG Wei  HE Jia-wen  ZHU Zu-ming
Affiliation:1.State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049,China;2.State Key Laboratory for Fatigue and Fracture of Materials, Institute of Metal Research, Chinese Academy of Sciences
Abstract:The interfacial shear strength of SiC fiber reinforced aluminum composite treated with SiC 2 was studied by the method of fragmentation and acoustic emission after a certain cycle fatigue loading. The result shows that the pretreatment with fatigue and without fatigue displays a great influence on the stiffness of the test machine which will affect the calculations of fiber strength in composite. The measurement of fiber strength of hot pressed specimens by a dissolving method indicates that the fiber strength does not lose via composite process. The critical length of fiber increases a little after certain cycles of fatigue loading and thus, interfacial shear strength decreases.
Keywords:composite materials  fracture  acoustic emission  interfacial shear strength
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《复合材料学报》浏览原始摘要信息
点击此处可从《复合材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号