Observations of the spallation modes in an overlay coating and the corresponding thermal barrier coating system

Abstract

The oxidation dynamics of an overlay coating and the corresponding thermal barrier coating system are presented. The particular systems examined are composed of a nickel-based superalloy with an air plasma-sprayed NiCrAlY bond coat and the thermal barrier coating system consists of air plasmasprayed yttria stabilized zirconia layer. Failure can occur in these systems by crack propagation within the ceramic outer layer at the interface with the bond coat. Defects, such as microcracks and pores, are common in plasma-sprayed coatings and within the thermally grown oxide scales. These can act as initiation sites for cracks. The subsequent growth of these cracks can lead to loss of the outer protective materials. Considerable information is available by microscopic examination of sections through test specimens that have been held at temperature for varying amounts of time. By careful sample preparation it is possible to monitor the development of the oxide scale formed during high temperature testing and the sites of failure. Identification of the initiation sites and growth of cracks is important in understanding the spallation process. In this study, scanning electron microscopy is used to provide evidence of the processes involved in the two systems. A comparison of the two coating systems reveals the effect the outer ceramic layer has on the oxide scale growth, and the spallation processes crucial to the understanding of the failure mechanisms of these coating systems.