搅拌头形状对搅拌摩擦焊材料变形和温度场的影响

采用完全热力耦合模型研究了搅拌头形式对搅拌摩擦焊接中材料变形和温度场的影响.结果表明,搅拌头轴肩形状变得平坦会导致焊接温度和塑性变形程度的降低,有效功率会减少.采用锥形搅拌针时焊接温度较柱形搅拌针低,这是由于接触而滑动率减少导致摩擦热减少,但是此时,塑性变形会增加.采用尺寸较小的搅拌头轴肩时,摩擦面积的减小是导致焊接温...

Effect of pin shapes on material deformation and temperature field in friction stir welding

Fully coupled thermo-mechanical model was adopted to study the effect of pin shapes on deformations and temperature fields in friction stir welding.Results indicated that a flatter shoulder could lead to the decrease of temperature and plastic deformation.The efficient power decreased simultaneously.With comparison to the case of cylindrical pin,the temperature decreased in the case of conical pin.The decrease of the frictional heat induced by the decrease of the slipping rate was the reason for such a decrease of temperature.The plastic deformation increased when the conical pin was adopted.When the smaller shoulder was used,the temperature decreased obviously,which was caused by the decrease of the frictional area.So,higher angular velocity should be used when the smaller shoulder was used to improve the welding temperature and the weld quality.