| 脉冲电参数对混气电火花加工工艺性能的影响 |
| |
| 引用本文： | 李立青,郭永丰,吕善进. 脉冲电参数对混气电火花加工工艺性能的影响[J]. 电加工与模具, 2002, 0(4): 47-50 |
| |
| 作者姓名： | 李立青 郭永丰 吕善进 |
| |
| 作者单位： | 哈尔滨工业大学 |
| |
| 摘 要： | 根据混气电火花加工对混气加工装置的要求，介绍了混气电火花加工装置的原理及组成。利用该混气装置，进行了电参数对混气电火花加工性能影响的实验研究，并对其进行了分析。实验结果表明，脉冲宽度、峰值电流对混气电火花加工的影响不同于普通电火花加工，加工速度和表面粗糙度值随着脉宽和峰值电流的增大而减小。
|
| 关 键 词： | 混气电火花加工 加工性能 电参数 |
| 修稿时间： | 2002-02-07 |
The influence of electrical pulse parameters on the technology performance of mixed-air EDM |
| |
| Li Liqing et al.. The influence of electrical pulse parameters on the technology performance of mixed-air EDM[J]. Electromachining & Mould, 2002, 0(4): 47-50 |
| |
| Authors: | Li Liqing et al. |
| |
| Affiliation: | Li Liqing et al. |
| |
| Abstract: | Introduced the principle and constitute of the Mixed air EDM device by the requirements of the mixed air EDM device. Mixed air EDM experimental investment for the relations of the electrical pulse parameters and the technology performance are introduced and analyzed. The experimental results show that the influences of the pulse duration and peak current on the Mixed air technology performance are different from the conventional EDM. The more the pulse duration and peak current, the less the material remove rate and the surface roughness. |
| |
| Keywords: | mixed air EDM technology performance electrical pulse parameters |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
