| 电器开关外壳注射模设计 |
| |
| 引用本文： | 钟玲,范植坚,张晖.电器开关外壳注射模设计[J].工程塑料应用,2005,33(5):49-51. |
| |
| 作者姓名： | 钟玲 范植坚 张晖 |
| |
| 作者单位： | 西安工业学院机电工程系,西安,710032 |
| |
| 摘 要： | 电器开关外壳注塑件模具的特点是型腔表面质量要求较高，型芯数量多，型芯及顶杆直径小、强度低。针对以上特点，模具设计采用潜伏式浇口实现注塑件外形美观要求，采用组合式整体嵌入型结构解决模具型芯问题，利用顶杆顶出解决脱模问题。该模具结构小巧而紧凑，运行顺畅无阻。
|
| 关 键 词： | 注射模 潜伏式浇口 整体嵌入 电器开关外壳 |
| 修稿时间： | 2005年2月21日 |
DESIGN OF THE INJECTION MOULD OF ELECTRIC SWITCH SHELL |
| |
| Zhong Ling,Fan Zhijian,Zhang Hui.DESIGN OF THE INJECTION MOULD OF ELECTRIC SWITCH SHELL[J].Engineering Plastics Application,2005,33(5):49-51. |
| |
| Authors: | Zhong Ling Fan Zhijian Zhang Hui |
| |
| Abstract: | The characteristics of the mould for electric switch shell was high high serface quality of die space, many core, small diameter and low intensity of core and mandril. Aiming at the characteristics above, the tunnel gate was used to realize the beautiful appearance, the combining embedded structure was employed to solve the problem about cores, mandrils were used to solve demoulding problem. The mold had small and compact structure and could operate smoothly. |
| |
| Keywords: | injection mould tunnel gate embed wholly electric switch shell |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
