| 活塞环用钢6Cr13Mo异型截面轧制的显式动力学有限元分析 |
| |
| 引用本文： | 肖荣清,周艳平,肖文凯.活塞环用钢6Cr13Mo异型截面轧制的显式动力学有限元分析[J].武汉大学学报(工学版),2005,38(2):91-94. |
| |
| 作者姓名： | 肖荣清 周艳平 肖文凯 |
| |
| 作者单位： | 武汉大学动力与机械学院,湖北,武汉,430072 |
| |
| 基金项目： | 湖北省科技攻关项目(2003AA101C09). |
| |
| 摘 要： | 对活塞环用钢6Cr13Mo的成型过程建立了数学模型,并采用大型通用显式动力有限元分析软件AN SYS/LS_DYNA模拟了异型截面轧制的整个过程,所计算的变形情况与实际变形相符,证明显式动力有限元分析方法可有效地应用于活塞环用型钢的轧制分析.
|
| 关 键 词： | 活塞环 显式动力有限元法 6Cr13Mo 异型轧制 数值模拟 |
| 文章编号： | 1671-8844(2005)02-091-04 |
| 修稿时间： | 2004年10月15 |
Analysis of special rolling of steel used for piston ring by explicit dynamic FEM |
| |
| XIAO Rong-qing,ZHOU Yan-ping,XIAO Wen-kai.Analysis of special rolling of steel used for piston ring by explicit dynamic FEM[J].Engineering Journal of Wuhan University,2005,38(2):91-94. |
| |
| Authors: | XIAO Rong-qing ZHOU Yan-ping XIAO Wen-kai |
| |
| Abstract: | A mathematic model for rolling process of steel 6Cr13Mo used for piston ring is established; and the large commercial explicit dynamic finite element analysis code, ANSYS/LS_DYNA, is used to simulate the process of special rolling of the steel. The good agreement for deformation of special rolling between the calculated and the experimental results is obtained. It is proved that the explicit dynamic FEM can be used effectively to analyze the special rolling of piston ring. |
| |
| Keywords: | piston ring explicit dynamic finite element method 6Cr13Mo special rolling numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
