The effect of hole diameter on the torsional mechanical properties of the equine third metacarpal bone

The torsional monotonic structural material properties of equine metacarpi with or without, either a 5/16 inch or 3/8 inch diameter bicortical lateromedial middiaphyseal hole were assessed to determine the effect of a hole on metacarpal strength. Torsional stiffness was not significantly effected by the presence of a bicortical hole, whereas yield and failure angles, torques and energies of metacarpi with a hole were 51% to 97% of those of intact bones. Significant differences were not apparent for yield and failure mechanical properties between metacarpi with a 5/16 inch diameter hole and metacarpi with a 3/8 inch diameter hole; however, postyield mechanical properties were lower for metacarpi with a 3/8 inch hole. Whereas some metacarpi with a 5/16 inch hole were capable of plastic deformation before failure, metacarpi with a 3/8 inch diameter hole appeared to have sufficient stress concentration to propagate complete fracture on structural yield.