| 三维应力状态下圆筒形巷道塑性区次生应力、半径和位移 |
| |
| 引用本文： | 黄煜镔,朱礼君.三维应力状态下圆筒形巷道塑性区次生应力、半径和位移[J].地下空间与工程学报,2004,24(1):5-6. |
| |
| 作者姓名： | 黄煜镔 朱礼君 |
| |
| 作者单位： | 同济大学交通运输工程学院,上海,200092;广东凡口铅锌矿,广东,韶关,512325 |
| |
| 基金项目： | 国家自然基金项目资助(编号:598790 12 ) |
| |
| 摘 要： | 现有的圆筒形巷道塑性区次生应力、半径和位移的理论解是基于Mohr Coulomb准则推导而得 ,但是Mohr Coulomb准则没有考虑中间主应力的影响。为此本文利用双剪强度理论分析了三维应力状态下圆筒形巷道塑性区次生应力、半径和位移。计算表明圆筒形巷道在三维应力状态下塑性区半径和位移比二维应力状态下更小 ,据此可充分发挥岩体自身的承载能力 ,对岩体工程具有重要意义
|
| 关 键 词： | 三维应力 圆筒形 塑性区 次生应力 半径 位移 |
| 文章编号： | 1001-831X(2004)01-0005-02 |
| 修稿时间： | 2003年11月12 |
Secondary Stress,Radius and Displacement in Plastic Zone of Cylinder Tunnel under 3-D Stress |
| |
| HUANG Yu-bin et al.Secondary Stress,Radius and Displacement in Plastic Zone of Cylinder Tunnel under 3-D Stress[J].Chinese Journal of Underground Space and Engineering,2004,24(1):5-6. |
| |
| Authors: | HUANG Yu-bin |
| |
| Affiliation: | HUANG Yu-bin et al |
| |
| Abstract: | At present, the theoretical solution of sec ondary stress, radius and displacement in plastic zone of cylinder tunnel is derived on basis of Mohr-Cou l omb criterion, in which the influence of intermediate main stress is not taken i nto consideration. In this paper, the secondary stress, radius and displacement in plastic zone of cylinder tunnel under 3-D stress are analyzed on basis of do u ble shear strength theory. The results of calculation show that the radius and d isplacement in plastic zone of cylinder tunnel under 3-D stress are less than t h ose under 2-D stress, therefore, the bearing capacity of the rock itself could be utilized fully, and it has great significance to the rock engineering. |
| |
| Keywords: | D stress cylinder plastic zone second ary stress radius displacement |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
