| 磨煤机出口端盖裂纹焊接 |
| |
| 引用本文： | 张家若.磨煤机出口端盖裂纹焊接[J].焊管,2011,34(10):44-48. |
| |
| 作者姓名： | 张家若 |
| |
| 作者单位： | 陕西大唐户县热电厂,西安,710302 |
| |
| 摘 要： | 针对ZG35B钢筒式钢球磨煤机出口端盖的2条穿透性裂纹,采取了挖除裂纹、“热焊法”与加焊加强筋相结合的方法进行处理.对于在焊接过程中容易产生冷裂纹、热裂纹和焊接变形量大的特点,采用合理的焊接参数、焊接顺序等工艺措施,如第一层采用小电流、慢速焊,多层多道焊,焊后跟踪锤击,及时进行脱氢,焊后进行高温回火处理.通过焊补,彻底...
|
| 关 键 词： | ZG35B钢 磨煤机 裂纹 焊接 |
Mill End Cover Crack Welding |
| |
| ZHANG Jia-ruo.Mill End Cover Crack Welding[J].Welded Pipe and Tube,2011,34(10):44-48. |
| |
| Authors: | ZHANG Jia-ruo |
| |
| Affiliation: | ZHANG Jia-ruo(Huxian Datang Power Plant,Xi'an 710302,Shannxi,China) |
| |
| Abstract: | Aiming at two penetrating cracks in ZG35B type tube mill end cover,adopting excavating crack,heat welding to deal with combined with added reinforcing rib.During welding process,it is easy to appear cold crack,hot crack and large deformation,so the reasonable welding processes should be used,such as welding parameter,welding sequence,etc.For example,in the first layer,using a small current,the slow welding rate,multi-layer multi-pass welding,tracking and hammering after welding,dehydrogenating timely,and hi... |
| |
| Keywords: | ZG35B steel mill crack welding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
