| 主晶相的合成方法对BSTO材料介电性能的影响 |
| |
| 引用本文： | 张鹤凌,梁辉,徐廷献,吴芸. 主晶相的合成方法对BSTO材料介电性能的影响[J]. 压电与声光, 2003, 25(6): 508-510 |
| |
| 作者姓名： | 张鹤凌 梁辉 徐廷献 吴芸 |
| |
| 作者单位： | 天津大学,先进陶瓷及加工技术教育部重点实验室,天津,300072 |
| |
| 摘 要： | 分别采用水热法和碳酸盐固相合成法获得的原料制备了Ba0.7Sr0.3TiO3基的陶瓷样品，研究分析了样品的介电性能和微观形貌，并将两种样品的性能进行比较。实验结果表明，水热法合成的Ba0.7Sr0.3TiO3样品烧结温度较碳酸盐固相合成法获得的样品有较大幅度的降低，材料的相对介电常数和介电常数温度变化率和介电常数频率变化率都有所降低。在用两种方法合成原料所制备的烧成样品中都发现了偏离原始组分的现象，采用水热法生产原料制备的样品的相组成与碳酸盐固相合成法获得样品相比偏离原始组分较多。
|
| 关 键 词： | 钛酸锶钡 介电性能 水热法合成 陶瓷 |
| 文章编号： | 1004-2474(2003)06-0508-03 |
| 修稿时间： | 2003-06-05 |
Influence of Raw Material Synthesizes on Dielectric Properties of BSTO System |
| |
| Abstract: | Barium strontium titanate ceramic system based samples were prepared by the raw materials synthesized with hydrothermal and conventional carbonates methods. Dielectric characteristics and microstructures of the samples were studied and compared. It showed that sintering temperature of novel synthesized samples processed is much lower than that of conventional one. Similar situation occurred in dielectric characteristics,temperature and frequency dependence of dielectric constant. Deviations to original content were observed in the sintered samples,which was more seriously in the novel synthesized sample than that of the conventional synthesized sample. |
| |
| Keywords: | barium strontium titanate dielectric properties hydrothermal synthesis ceramic |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
