| 注塑机合模力的测量及误差因素分析 |
| |
| 引用本文： | 刘旭红,宋世柳. 注塑机合模力的测量及误差因素分析[J]. 广西工学院学报, 2006, 17(4): 52-55 |
| |
| 作者姓名： | 刘旭红 宋世柳 |
| |
| 作者单位： | 广西工学院,机械工程系,广西,柳州,545006;广西工学院,机械工程系,广西,柳州,545006 |
| |
| 基金项目： | 广西工学院校科研和教改项目 |
| |
| 摘 要： | 合模力是塑料注射成型机的一项重要技术参数,准确测量合模力不仅是检验产品合格与否的重要方法,也是分析机构的受力状况,验证设计计算的重要依据。介绍了利用应变电测原理及技术测量合模力的方法,并具体阐述应变片的布置和桥接方法以及消除测量误差提高测量精度的措施,为测量注塑机合模力提供了一种有效方法。
|
| 关 键 词： | 合模力 电测法 应变 塑料注射成型机 |
| 文章编号： | 1004-6410（2006）04-0052-04 |
| 收稿时间： | 2006-10-16 |
| 修稿时间： | 2006-10-16 |
Testing and error analysis of plastic injection molding machine clamp force |
| |
| LIU Xu-hong,SONG Shi-liu. Testing and error analysis of plastic injection molding machine clamp force[J]. Journal of Guangxi University of Technology, 2006, 17(4): 52-55 |
| |
| Authors: | LIU Xu-hong SONG Shi-liu |
| |
| Affiliation: | Department of Mechanical Engineering,Guangxi University of Technology,Liuzhou 545006,China |
| |
| Abstract: | The clamp force is an important technical parameter of plastic injection molding machine.A method to test clamp force according to electro-test theory and technic was introduced.And the methods to place strain foil and connect electro-bridge were illustrated.The measures to avoid measurement error and improve measurement accuracy were also presented.An effective way was offered to test clamp force. |
| |
| Keywords: | clamp force electro-test method strain plastic injection molding machine |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
