| 小型精密薄壁塑件注射模设计方法探讨 |
| |
| 引用本文： | 杨松. 小型精密薄壁塑件注射模设计方法探讨[J]. 模具制造, 2007, 7(11): 29-33 |
| |
| 作者姓名： | 杨松 |
| |
| 作者单位： | 安徽工业大学,安徽马鞍山,243000 |
| |
| 摘 要： | 结合一个例子探讨了小型精密薄壁塑件成型模具设计中的一些关键性问题,并提出了一些可行的方法.
|
| 关 键 词： | 镶件 模板厚度 工艺方法 注射模设计 |
Discuss on the Design Methods of Injection Mold for the Small Precise Thin-Thickness Plastic Part |
| |
| Yang Song. Discuss on the Design Methods of Injection Mold for the Small Precise Thin-Thickness Plastic Part[J]. Die & Mould Manufacture, 2007, 7(11): 29-33 |
| |
| Authors: | Yang Song |
| |
| Abstract: | Through an example, the key problems of the small precise thin-thickness plastic part molding in injection mold were discussed. The solution was put forward. |
| |
| Keywords: | insert block mold plate thickness technological method injection mold design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
