| 基于公理化设计的可编程序控制器控制系统设计方法 |
| |
| 引用本文： | 王晓勇,唐敦兵,楼佩煌,马万太.基于公理化设计的可编程序控制器控制系统设计方法[J].计算机集成制造系统,2008,14(11). |
| |
| 作者姓名： | 王晓勇 唐敦兵 楼佩煌 马万太 |
| |
| 作者单位： | 1. 南京航空航天大学机电学院,江苏,南京,210016;南京工业职业技术学院机械工程系,江苏,南京,210046
2. 南京航空航天大学机电学院,江苏,南京,210016 |
| |
| 基金项目： | 国家自然科学基金资助项目，江苏省精密制造工程技术研究开发中心开放基金资助项目 |
| |
| 摘 要： | 为提升可编程序控制器控制系统设计的系统性和科学性,提出了基于公理化设计原理的可编程序控制器控制系统的设计方法,并建立了设计过程模型.该过程模型把可编程序控制器控制系统设计分为系统层设计和软件层设计两个设计层次,每个层次都基于公理化设计理论进行设计.两个设计层之问通过层级映射关系进行连接,实现了公理化设计理论与可编程序控制器控制系统传统设计知识的有效结合.最后通过实例验证了该方法的可行性.
|
| 关 键 词： | 公理化设计 可编程序控制器 控制系统 设计方法 |
Axiomatic-design-based design method of the programmable logic controller control system |
| |
| WANG Xiao-yong,TANG Dun-bing,LOU Pei-huang,MA Wan-tai.Axiomatic-design-based design method of the programmable logic controller control system[J].Computer Integrated Manufacturing Systems,2008,14(11). |
| |
| Authors: | WANG Xiao-yong TANG Dun-bing LOU Pei-huang MA Wan-tai |
| |
| Affiliation: | WANG Xiao-yong1,2,TANG Dun-bing1,LOU Pei-huang1,MA Wan-tai1(1.College of Mechanical & Electrical Engineering,Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China,2.Department of Mechanical Engineering,Nanjing Institute of Industry Technology,Nanjing 210046,China) |
| |
| Abstract: | To improve the systematicness & scientificalness of Programmable Logic Controller(PLC) control system design,the PLC control system design method based on axiomatic design theory was proposed and the design process model was constructed.The PLC control system design process was divided into the system design process and the software design process.Design in each design process was conducted by using the axiomatic design theory.The two processes were connected by the hierarchy mapping,the axiomatic design th... |
| |
| Keywords: | axiomatic design programmable logic controller control system design method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
