Dielectric and mechanical properties of poly(vinyl chloride)–dioctylphthalate systems

The mechanical properties, tensile strength, and elongation were investigated for poly(vinyl chloride) (PVC) samples mixed with dioctylphthalate (DOP) at concentrations from 0 to 100 parts per hundred parts PVC at 23°C. It was found that the tensile strength decreased with the increase of concentration, and the elongation was increased until a concentration of 30 DOP content, and then decreased. This leads to the suggestion that intermolecular plasticization is dominant until 30 DOP content, while interstructural plasticization is prevailing for higher concentrations. The permittivity ε′ and the dielectric loss factor ε″ of the same samples have been measured in the frequency range 10²–10⁵ Hz at temperatures from 3 to 96°C. Results show that as the DOP content increases in PVC, the dielectric absorption becomes broader, and the glass transition temperature T_g is lowered. The magnitude of the loss peak decreases with an increase of DOP content to a minimum at concentrations from 40 to 60 DOP content. At higher concentrations the loss peak is increased and T_g is unaltered. Another absorption was observed at 100 Hz and at high temperatures, which was attributed to Maxwell–Wagner effect or direct current conductivity or both of them. It was found that the sample containing 40 parts DOP in 100 parts PVC possesses the best mechanical and electrical properties.