首页 | 本学科首页   官方微博 | 高级检索  
     

银-铜合金中磷的测定
引用本文:高颖剑.银-铜合金中磷的测定[J].矿冶,2009,18(3):96-99.
作者姓名:高颖剑
作者单位:北京矿冶研究总院,北京,100044
摘    要:采用硝酸、高氯酸溶样并将偏磷酸氧化为正磷酸,用硫化沉淀法消除Ag、Cu的干扰,同时也消除Pb、As的干扰,在铋盐催化下磷与钼酸铵反应生成黄色磷钼酸铵,此磷钼酸铵能被抗坏血酸还原为磷钼蓝,以光度法直接测定。其最大吸收波长为700nm,表观摩尔吸光系数为1.61×104L/(mol.cm),磷在0~50μg/50mL范围内符合比耳定律,试样加标回收率为96.96%~98.64%,9次测定的相对标准偏差为2.79%~5.10%。适用于Ag-Cu合金中0.005%~1%磷的测定。

关 键 词:  硫化沉淀法  吸光光度法  钼蓝  铋盐  Ag-Cu合金

DETERMINATION OF PHOSPHORUS IN Ag-Cu ALLOY
GAO Ying-jian.DETERMINATION OF PHOSPHORUS IN Ag-Cu ALLOY[J].Mining & Metallurgy,2009,18(3):96-99.
Authors:GAO Ying-jian
Affiliation:Beijing General Research Institute of Mining & Metallurgy;Beijing 100044 China
Abstract:When sample is dissolved with nitric acid and perchloric acid,metaphosphoric acid in solution is oxided into orthophosphoric acid.The interferences of Ag,Cu,Pb and As are eliminated by sulfide precipitation method.Reacting with ammonium molybdate under the catalyst of bismuth salt,phosphorus is transferred yellow ammonium phosphomolybdate.The ammonium phosphomolybdate is reducted into phosphomolybdenum blue by ascorbic acid.Then the content of phosphorus is determined with photometric method.The maximum abs...
Keywords:phosphorus  sulfide precipitation method  photometric method  molybdenum blue  bismuth salt  Ag-Cu alloy    
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《矿冶》浏览原始摘要信息
点击此处可从《矿冶》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号