| 粉末冶金法制备纳米碳管增强铜基复合材料的研究 |
| |
| 引用本文： | 董树荣,涂江平,张孝彬.粉末冶金法制备纳米碳管增强铜基复合材料的研究[J].浙江大学学报(自然科学版 ),2001,35(1):29-32. |
| |
| 作者姓名： | 董树荣 涂江平 张孝彬 |
| |
| 作者单位： | [1]浙江大学信息科学与工程学系，浙江杭州310027 [2]浙江大学材料科学与工程学系，浙江杭州310027 |
| |
| 基金项目： | 浙江省自然科学基金资助项目(6100007)；国家自然科学基金资助项目(59872030) |
| |
| 摘 要： | 用化学镀在纳米碳管表面镀覆了铜及镍，并用粉末冶金法制备纳米碳管增强铜基复合材料，研究了制备工艺的有关参数对其性能的影响．结果表明：不同的工艺参数对复合材料的性能有不同影响，相对其它参数，纳米碳管体积分数显著影响复合材料的综合性能．纳米碳管体积含量在12％左右时，复合材料的致密度和硬度达到较好综合值。
|
| 关 键 词： | 粉末冶金法 纳米碳管 铜基复合材料 |
| 文章编号： | 1008-973X(2001)01-0029-04 |
| 修稿时间： | 1998年10月20 |
Preparation of Cu-based
composite materialsreinforced by nanotube by powder-metallurgy |
| |
| DONG Shu-rong\ ,TU Jiang-ping\ ,ZHANG Xiao-bin\ \.Preparation of Cu-based
composite materialsreinforced by nanotube by powder-metallurgy[J].Journal of Zhejiang University(Engineering Science),2001,35(1):29-32. |
| |
| Authors: | DONG Shu-rong\ TU Jiang-ping\ ZHANG Xiao-bin\ \ |
| |
| Affiliation: | DONG Shu-rong\ 1,TU Jiang-ping\ 2,ZHANG Xiao-bin\ 2\, |
| |
| Abstract: | The metal films of copper and nickel were coating on the surface of carbon nanotubes by no-electrical plating. Samples of nanotube-carbon Cu-based composite were prepared by the technology of powder-metallurgy. The results showed that the preparation parameters have different effects on the properties of the resulting products. The most important factor was found to be the nanotube content of the composite materials. The composites has comprehensive property when nanotubes content is about 12%. |
| |
| Keywords: | powder-metallurgy nanotube carbon Cu-based composite |
| 本文献已被 CNKI 维普 等数据库收录！ |
