首页 | 本学科首页   官方微博 | 高级检索  
     

半导体桥对含能材料的点火特性研究
引用本文:杨贵丽,朱顺官,沈瑞琪. 半导体桥对含能材料的点火特性研究[J]. 含能材料, 2012, 20(4): 391-396
作者姓名:杨贵丽  朱顺官  沈瑞琪
作者单位:南京理工大学,南京理工大学,南京理工大学
基金项目:国家重点基础研究发展计划(973计划)
摘    要:在10μF钽电容放电激励下,对两种阻值相当质量不同的半导体桥(SCB)和细化的发火药剂斯蒂芬酸铅(LTNR)和叠氮化铅(PbN6)所组成的发火件进行了实验研究,根据发火件的电特性变化和发火现象发现半导体桥存在电热发火、电爆发火和等离子体发火三种情况,测试了SCB/LTNR和SCB/PbN6发火件的50%发火电压和发火时间。结果表明半导体桥的发火电压阈值不仅与发火药剂有关,还与半导体桥换能元有关,所以半导体桥的设计存在最佳质量,通过对比得知LTNR比PbN6感度高,PbN6比LTNR的燃速高。

关 键 词:军事化学与烟火技术  半导体桥  发火药剂  临界发火电压  发火时间
收稿时间:2011-06-29
修稿时间:2012-02-29

Study on Ignition Property of Energetic Material by Semiconductor Bridge
YANG Gui-li,ZHU Shun-guan and SHEN Rui-qi. Study on Ignition Property of Energetic Material by Semiconductor Bridge[J]. Chinese Journal of Energetic Materials, 2012, 20(4): 391-396
Authors:YANG Gui-li  ZHU Shun-guan  SHEN Rui-qi
Affiliation:Nanjing University of Science and Technology,Nanjing University of Science and Technology,Nanjing University of Science and Technology
Abstract:Capacitive discharge SCB initiation of energetic materials was discussed at different firing voltage levels.Both of SCB are the same resistance and difference mass.The energetic materials are LTNR and PbN6.For the SCB device,there are three modes of igniting energetic materials,electrothermal ignition,electrical explosive ignition and plasma ignition,respectively.To understand further the behavior of SCB ignition,we measured the critical ignition voltage and ignition time of SCB/LTNR and SCB/PbN6 device.As a result the critical ignition energy is not only related with energetic materials,but also the comparable mass of the SCB bridge,so there is an optimal design mass about SCB bridge.Besides,the LTNR was more sensitive than PbN6,however,the burning rate of PbN6 is higher than that of LTNR.
Keywords:military chemistry and pyrotechnic technology   semiconductor bridge (SCB)    energetic material   firing voltage   firing time
本文献已被 CNKI 等数据库收录!
点击此处可从《含能材料》浏览原始摘要信息
点击此处可从《含能材料》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号