首页 | 本学科首页   官方微博 | 高级检索  
     

钴冰镍常压浸出工艺研究
引用本文:周雍茂,胡宝磊.钴冰镍常压浸出工艺研究[J].有色金属(冶炼部分),2012(8):11-13.
作者姓名:周雍茂  胡宝磊
作者单位:中南大学冶金科学与工程学院,长沙,410083
摘    要:以镍转炉渣还原硫化熔炼得到的钴冰镍为原料,在常压下于硫酸体系中进行浸出,考察了硫酸浓度、液固比、浸出时间及浸出温度对钴冰镍中有价成分浸出率的影响。结果表明,液固比和硫酸浓度对钴、镍、铁的浸出率影响较大。当硫酸浓度为1.6mol/L、液固比5、浸出时间2.5h、浸出温度85℃时,铁浸出率达到69%,镍、钴浸出率分别控制在1%和5%以内,取得了很好的选择性浸出效果。

关 键 词:钴冰镍  浸出  硫酸        选择性浸出
收稿时间:3/19/2012 4:16:12 PM
修稿时间:3/19/2012 4:16:12 PM

Study on Atmospheric Pressure Leaching Process of Cobalt-nickel Matte
ZHOU Yong-mao and HU Bao-lei.Study on Atmospheric Pressure Leaching Process of Cobalt-nickel Matte[J].Nonferrous Metals(Extractive Metallurgy),2012(8):11-13.
Authors:ZHOU Yong-mao and HU Bao-lei
Affiliation:School of Metallurgical Science and Engineering,Central South University,Changsha,
Abstract:The cobalt-nickel matte,a reduction product from nickel converter slag by vulcanization smelting,was atmospherically pressure leached at the sulfuric acid system.The effects of sulfuric acid concentration,ratio of liquid to solid(L/S),leaching time and temperature on leaching rate of valuable metals were investigated.The results show that L/S and sulfuric acid concentration have great influence on the leaching rate of cobalt,nickel and ferrum.The ferrum leaching rate reaches to 69%,nickel and cobalt leaching rate could be controlled below 1% and 5% respectively under the conditions including sulfuric acid concentration of 1.6 mol/L,L/S of 5,leaching time of 2.5 h,and leaching temperature of 85 ℃.A good selectivity leaching effect was obtained.
Keywords:cobalt-nickel matte  leaching  sulfuric acid  nickel  cobalt  ferrum  selectivity leaching
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息
点击此处可从《有色金属(冶炼部分)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号