| 轴承保持器模具设计 |
| |
| 引用本文： | 孙锦明.轴承保持器模具设计[J].模具工业,2000(6):9-10. |
| |
| 作者姓名： | 孙锦明 |
| |
| 作者单位： | 南通锦益电缆有限公司,江苏通州,226300 |
| |
| 摘 要： | 根据轴承保持器的工艺特点 ,确定了零件的成形工序 ,并介绍了冲窗孔凸、凹模尺寸的计算方法及冲槽模结构
|
| 关 键 词： | 轴承保持器 窗孔尺寸 冲槽模结构 |
Design of the Die for Bearing Cages |
| |
| Sun Jinming.Design of the Die for Bearing Cages[J].Die & Mould Industry,2000(6):9-10. |
| |
| Authors: | Sun Jinming |
| |
| Abstract: | The forming process of the bearing cage was determined according to it technological characteristics. The method for calculating the dimensions of the punch and matrix for the window, and the structure of the die for the slot were introduced. |
| |
| Keywords: | bearing cage dimensions of the window die structure for the slot |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
