Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA–SPS technique |
| |
| Affiliation: | 1. NETME Centre, Institute of Materials Science and Engineering, Brno University of Technology, Technicka, 2896/2 Brno, Czech Republic;2. RHP-Technology GmbH, Forschungs- und Technologiezentrum, 2444 Seibersdorf, Austria;3. Department of Prhysics of Materials, Faculty of Mathematics and Physics, Charles University, Ke Karlovu 5, Praha 2 121 16, Czech Republic;4. Institute of Physics of Materials CAS, Zizkova 22, 61662 Brno, Czech Republic |
| |
| Abstract: | Most of multi-component high entropy alloys were designed as equi-atomic or near equi-atomic and were mainly prepared by vacuum arc melting. The present paper reports synthesis of inequi-atomic Co0.5FeNiCrTi0.5 high entropy alloy by mechanical alloying and spark plasma sintering (MA–SPS). Alloying behavior, microstructure and properties of Co0.5FeNiCrTi0.5 alloy are investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and instron testing system, respectively. Both BCC and FCC crystal structure phases are observed after MA, while a FCC phase and additional sigma phase are noticed after SPS. Moreover, numerous nanostructured phases are founded in the alloy after consolidated by SPS. The alloy with a density of 99.15% after SPS exhibits excellent comprehensive mechanical properties. The yield stress, compressive strength, compression ratio and Vickers hardness of the alloy are 2.65 GPa, 2.69 GPa, 10.0% and 846 HV, respectively. The fracture mechanism of this alloy is observed as cleavage fracture and intergranular fracture. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
