| 高精度、宽输出高压直流电源控制模块的设计 |
| |
| 引用本文： | 孙晨晨,张强,徐玮巍,高颂,赵华. 高精度、宽输出高压直流电源控制模块的设计[J]. 南京师范大学学报, 2018, 0(3). DOI: 10.3969/j.issn.1672-1292.2018.03.010 |
| |
| 作者姓名： | 孙晨晨 张强 徐玮巍 高颂 赵华 |
| |
| 作者单位： | 南京师范大学物理科学与技术学院,江苏 南京 210023 |
| |
| 摘 要： | 针对经典的密里根油滴实验对直流电源的高精度、宽输出等要求,进行了高压直流电源中控制模块的硬软件设计. 采用了双12 bit数模转换并联构成14 bit数模转换的方法,在不增加成本的基础上,提高了控制电压的分辨率. 采用软件补偿的方法提高控制精度,将实际控制电压的最大误差由0.12 V改善到了0.000 6 V. 实验结果表明,高压直流电源的输出范围为-1 200～1 200 V,精度为±0.072 V.
|
| 关 键 词： | 高压直流电源 控制模块 数模转换模块 软件修正 |
Design of Control Module for DC Power Supply withHigh Precision and Output Range of Voltage |
| |
| Sun Chenchen,Zhang Qiang,Xu Weiwei,Gao Song,Zhao Hua. Design of Control Module for DC Power Supply withHigh Precision and Output Range of Voltage[J]. Journal of Nanjing Nor Univ: Eng and Technol, 2018, 0(3). DOI: 10.3969/j.issn.1672-1292.2018.03.010 |
| |
| Authors: | Sun Chenchen Zhang Qiang Xu Weiwei Gao Song Zhao Hua |
| |
| Affiliation: | School of Physics and Technology,Nanjing Normal University,Nanjing 210023,China |
| |
| Abstract: | This paper completes the hardware and software design of the control module in the DC power supply with high precision and output range of voltage. This design uses a double 12-bit digital-to-analog conversion to form a 14-bit digital-to-analog conversion method,which improves the resolution of the control voltage without increasing the cost. In order to improve the actual control accuracy feature,the design uses software compensation method to improve actual control voltage maximum error from 0.12 V to 0.000 6 V. Through this design,DC power supply can achieve requirements of the output range of -1 200～1 200 V and the accuracy of ±0.072 V. |
| |
| Keywords: | high voltage DC power system control module D/A conversion module software correction |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《南京师范大学学报》浏览原始摘要信息 |
|
点击此处可从《南京师范大学学报》下载全文 |
|
