首页 | 本学科首页   官方微博 | 高级检索  
     

气测全烃值响应方程的建立及现场应用分析
引用本文:杨卫东,李斌.气测全烃值响应方程的建立及现场应用分析[J].录井工程,2002(1).
作者姓名:杨卫东  李斌
作者单位:新疆石油管理局地质录井公司,新疆石油管理局地质录井公司
摘    要:该文针对现场录井过程中经常会出现气测全烃值远远大于或小于组分体积分数之和,或者气测全烃值大于100%的不合理现象,在气样实验的基础上建立了标定状态下的气测全烃值响应方程并进样验证,分析了不同标样对气测全烃值的影响,建议对其标定样进行统一,以消除标定样变化对气测全烃值的影响。该文从全烃响应方程的角度对气测录井测量值的探讨,对于指导气测录井发展具有重要作用。

关 键 词:气测录井  全烃  组分  气样实验  响应方程  分析  标定样

The establishment of gas logging total hydrocarbon response equation and wellsite application analysis
Yang Weidong,Li Bin.The establishment of gas logging total hydrocarbon response equation and wellsite application analysis[J].Mud Logging Engineering,2002(1).
Authors:Yang Weidong  Li Bin
Affiliation:Geologging Company of Xingjiang Oil Administration Bureau
Abstract:According to the unreasonable phenomena that gas logging total hydrocarbon values are far more larger than or smaller than the sum of the component volume fractions,or gas logging total hydrocarbon values are larger than 100% which always occurs during wellsite logging,the author set up gas logging total hydrocarbon value response equation under calibration state on the basis of gas testing and verified it by gas sample analysis,then analysed the influences of different calibration samples on gas logging total hydrocarbon values.The suggestion of using united calibration gas sample was put forward in order to eliminate the influence of changing of the calibration sample on it. The paper discussed gas logging measuring value from the point of view of total hydrocarbon response equation,and it has an important effect on guiding gas logging development.
Keywords:Gas Logging  Total Hydrocarbon  Component  Gas Sample  Test  Response Equation  Analysis  Calibration  Sample  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号