| 高速卷绕头筒管夹头的虚拟样机建模与动态仿真 |
| |
| 引用本文： | 黄志斌,郑建荣,李勇,金剑.高速卷绕头筒管夹头的虚拟样机建模与动态仿真[J].现代制造工程,2011(2). |
| |
| 作者姓名： | 黄志斌 郑建荣 李勇 金剑 |
| |
| 作者单位： | 华东理工大学机械与动力工程学院,上海,200237 |
| |
| 基金项目： | 上海市引进技术的吸收与创新年度计划基金资助项目(07CH-001) |
| |
| 摘 要： | 高速卷绕头筒管夹头是结构复杂的细长悬臂高速旋转系统,其设计和动态性能问题是研发新型高速卷绕头的关键。采用SolidWorks、ADAMS、ANSYS软件的协同建模和仿真技术,研究建立了刚性和柔性体耦合、具有多处柔性支承、可以变质量和变转速仿真的筒管夹头系统虚拟样机模型,实现不同操作工况和设计参数下的高速卷绕头筒管夹头系统动态仿真实验和分析,为设计研究新型高速卷绕头提供了有效手段。
|
| 关 键 词： | 高速卷绕头 ADAMS软件 ANSYS软件 柔性体 变质量 动态性能 |
Modeling and dynamic simulation on virtual prototyping of the bobbin chuck of a high-speed winder |
| |
| HUANG Zhi-bin,ZHENG Jian-rong,LI Yong,JIN Jian.Modeling and dynamic simulation on virtual prototyping of the bobbin chuck of a high-speed winder[J].Modern Manufacturing Engineering,2011(2). |
| |
| Authors: | HUANG Zhi-bin ZHENG Jian-rong LI Yong JIN Jian |
| |
| Affiliation: | HUANG Zhi-bin,ZHENG Jian-rong,LI Yong,JIN Jian(School of Mechanical and Power Engineering,East China University of Science and Technology,Shanghai 200237,China) |
| |
| Abstract: | The bobbin chuck of high-speed winder is a complex slender cantilever and high-speed rotational system.Its design and dynamic performance have been the key technology of developing new winders.Uses the collaborative modeling technology of SolidWorks,ADAMS and ANSYS to establish the virtual prototyping of a bobbin chuck system.The model has rigid-flexible coupling structure,several flexible support,and can change mass and angular rate during simulation.Dynamic simulation and analysis of a high-speed bobbin c... |
| |
| Keywords: | high-speed winder ADAMS ANSYS flexible body variable mass dynamic performance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
