| Abstract: | This paper presents the effects of multi‐walled carbon nanotube (MWCNT) as reinforcing agent on some properties of natural fiber/polypropylene composites. In the sample preparation, MWCNT contents and fiber types (bagasse stalk and poplar) were used as variable parameters. The composites with different MWCNT contents were fabricated by melt compounding in a twin‐screw extruder and then by injection molding. The mass ratio of the wood flour to polymer was 40/60 (w/w). The mechanical properties of composites in terms of tensile, flexural, and Izod impact strength were evaluated. The morphology of the specimens was characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. Based on the findings of this study, it appears that mechanical properties reached the maximum when 2.5 wt% MWCNT were used. However, addition of 3.5 wt% MWCNT could not enhance the mechanical properties considerably. TEM micrographs showed that at high level of MWCNT loading (3.5 wt%) increased population of MWCNT leads to agglomeration and stress transfer gets blocked. The mechanical properties of composites filled with poplar fibers were generally greater than bagasse stalk composites. POLYM. COMPOS., 37:3269–3274, 2016. © 2015 Society of Plastics Engineers |
