Preparation of nano‐reinforced thermal conductive natural rubber composites

Natural rubber (NR) composites highly filled with nano‐α‐alumina (nano‐α‐Al₂O₃) modified in situ by the silane coupling agent bis‐(3‐triethoxysilylpropyl)‐tetrasulfide (Si69) were prepared. The effects of various modification conditions and filler loading on the properties of the nano‐α‐Al₂O₃/NR composites were investigated. The results indicated that the preparation conditions for optimum mechanical (both static and dynamic) properties and thermal conductivity were as follows: 100 phr of nano‐α‐Al₂O₃, 6 phr of Si69, heat‐treatment time of 5 min at 150°C. Furthermore, two other types of fillers were also investigated as thermally conductive reinforcing fillers for the NR systems: (1) hybrid fillers composed of 100 phr of nano‐α‐Al₂O₃ and various amounts of the carbon black (CB) N330 and (2) nano‐γ‐Al₂O₃, the particles of which are smaller than those of nano‐α‐Al₂O₃. The hybrid fillers had better mechanical properties and dynamic performance with higher thermal conductivity, which means that it can be expected to endow the rubber products serving under dynamic conditions with much longer service life. The smaller sized nano‐γ‐Al₂O₃ particles performed better than the larger‐sized nano‐α‐Al₂O₃ particles in reinforcing NR. However, the composites filled with nano‐γ‐Al₂O₃ had lower thermal conductivity than those filled with nano‐α‐Al₂O₃ and badly deteriorated dynamic properties at loadings higher than 50 phr, both indicating that nano‐γ‐Al₂O₃ is not a good candidate for novel thermally conductive reinforcing filler. POLYM. COMPOS., 37:771–781, 2016. © 2014 Society of Plastics Engineers